8.5.2.4
Changing the default view
The default view of the display is
Measurements
unless set otherwise.
1.
Select
Main menu/Configuration/HMI/Default view
and press
.
2.
Change the default view with
or
.
3.
Press
to confirm the selection.
8.5.2.5
Setting the system time and time synchronization
1.
Select
Main menu/Configuration/Time/System time
.
2.
Select the parameter with
or
.
3.
Press
, change the value with
or
and press
again.
4.
Repeat steps 2 and 3 to set the rest of the system time parameters.
5.
Select
Main menu/Configuration/Time/Synchronization/Synch source
and press
.
6.
Select the time synchronization source with
or
.
7.
Press
to confirm the selection.
Setting the daylight saving time
The IED can be set to determine the correct date for the DST shift every year. The
UTC time is used to set the DST.
1.
Set the
DST on day
and
DST off day
parameters to define on which week day
the time shift occurs.
2.
Set the
DST on date
and
DST off date
parameters to define on which month
and week the time shift occurs.
The DST on/off date must precede the selected DST on/off day and be within
the same week as the DST shift.
Table 25:
DST change on Sunday
Day of the DST shift
DST on/off date
First Sunday of the month
1
Second Sunday of the month
8
Third Sunday of the month
15
Fourth Sunday of the month
22
Last Sunday, if the month has 30 days
24
Last Sunday, if the month has 31 days
25
For example, if the DST is observed from the last Sunday in March to the last
Sunday in October and the time shift occurs at 01:00 UTC, the setting
parameters are:
1MRS756708 C
Section 8
Commissioning
615 series
111
Operation Manual