ABB RBIP-01, Руководство пользователя

Страница: 28 / 58

User interface
28
Network submenu
When you select the Network submenu, the Network Settings page opens. It
provides general IP settings of the router module. If needed, retrieve this information
from your IT administrator.
Network Settings page
On the Network Settings page, give the following settings for the router module:
Save button
The Save button temporarily saves the changes made on this page.
Note: You must save your changes before switching to another configuration page.
If you switch to another page without saving, the settings remain unchanged.
Note: You must activate the configuration before restarting the router module.
Activating the configuration saves all settings permanently. If you restart the router
module without activating the configuration, the old configuration remains active and
the changes are lost.
For activating your settings, see section Activate menu in chapter User interface .
Network Settings Description
IP Address The IP address of the router module in the designated network
Subnet Mask The subnet mask of the router module according to the IP address
Default Gateway
In networks where subnetworks are connected by IP routers, this
address is used to define the gateway to other networks (the IP address
of the router of the subnetwork where your router module is installed).
If default gateways are used, broadcast messages are most likely
blocked by the IP routers and you need to use a BBMD to transport the
broadcast messages.