Introduction to the manual
Contents of this chapter
This chapter describes the manual in short and gives some general information for the
reader. This chapter also contains a quick reference guide for implementing a safety system.
Applicability
The manual applies to ACS880 air-cooled and liquid-cooled multidrives which have the
option: Prevention of unexpected start-up with STO, with FSO (Q950).
For the Q950, ABB installs the FSO-12 safety functions module (Q973) or
the FSO-21 safety functions module (Q972) to the inverter units. When safety pulse
encoders are used, ABB installs the FSE-31 pulse encoder interface module (L521)
and the FSO-21 module to the inverter units. Only the FSO-21 module supports the FSE-31
module and the use of safety pulse encoders.
Note:
If you are using a safety pulse encoder/FSE-31 pulse encoder inferface module, refer
to
FSE-31 pulse encoder interface module user’s manual
(3AXD50000016597 [English])
for more information.
Required versions with the FSO-12 module:
•
ACS880 primary control program: 1.80 or later
•
FSO-12 safety functions module: revision C or later
•
Drive composer pro: 1.6 or later.
Required versions with the FSO-21 module:
•
ACS880 primary control program: 2.2 or later
•
FSO-21 safety functions module: revision D or later
•
FSE-31 pulse encoder interface module: revision D or later (if used)
•
Drive composer pro: 1.8 or later.
2
Introduction to the manual 11
