ABB PDCOM, Руководство по установке

Страница: 4 / 24

4
—
PDCO M – INSTALLATION MANUAL
2 Environmental aspects
2.1 Sustainable development
Sustainability was taken into account from the time
product design began and included the pro-
environmental manufacturing process, long life,
operation reliability and disposal of PDCOM.
The choice of materials and the suppliers was made
in accordance with the EU RoHS directive 2011/65/
EU of the European Parliament and of the council of
8 June 2011 on the Restriction of Hazardous
Substances in electrical and electronic equipment
(RoHS Directive).
PDCOM complies with the maximum values for lead
(Pb), mercury, hexavalent chromium, polybrominated
biphenyls (PBB), polybrominated diphenyl ethers
(PBDE) and cadmium.
Pursuant to EU-regulation REACH that came into
force on 1 June 2007, the products are solely non-
chemical. Moreover, the products supplied will not
release any substances under normal and
reasonably foreseeable application circumstances.
2.2 Disposing of the product
Definitions and regulations concerning hazardous
materials are country-specific and change as
knowledge of materials increases. The materials
used in this product are typical for electric and
electronic devices.
All parts used in this product are recyclable. When
disposing of PDCOM or its parts contact a local
waste handler who is authorized and specialized in
disposing of electronic waste. These handlers can
sort the material by using dedicated sorting
processes and dispose of the product in accordance
with local requirements.
2.3 Applicable directives,
standards and compliance
The following directives, standards and compliances
are applicable to PDCOM:
• Electrostatic Discharges Immunity test
• Radiated Electromagnetic RF- Field immunity test
• Conducted Low Frequency Immunity test
• EFT Immunity test: EN61000-4-4
• Surge immunity: EN61000-4-5
• Common Mode Conducted RF-Immunity test:
EN61000-4-6
• Power frequency magnetic field Immunity test:
EN61000-4-8
• Slow Damped Oscillatory Wave Immunity test
• DC Voltage Dips, Interruptions and Variations
• AC component (Ripple) in DC
• Pulse Magnetic Field Immunity test
• Low Frequency conducted disturbances Immunity
test
• Conducted Field emission test: CISPR 11
• Radiated Field Emission test
For VPIS systems supported:
• IEC 62271-206: Voltage presence indicating systems
for rated voltages above 1 kV and up to and including
52 kV
• IEC 61243-5:1997: Live working - Voltage detectors -
Part 5: Voltage detecting systems (VDS)
Table 1: Product composition
PDCOM Parts Material
Case Parts and screws Steel
Case Metal
Electronic modules Various
Package Box Cardboard
Attached material Manuals Paper