PGX 10 0 A N D PA X 10 0 |
P R E SSU R E T R A N SM I T T ER S | O I/P G X /PA X 10 0 - EN R E V. C
5
Bodily injury .
This message indicates a potentially dangerous situation.
Failure to avoid this could result in death or serious injury.
Minor injuries .
This message indicates a potentially dangerous situation.
Failure to avoid this could result in minor injuries. This may
also be used for property damage warnings.
This message indicates indicates operator tips or particularly
useful information. It does not indicate a dangerous or
damaging situation.
Property damage .
This message indicates a potentially damaging situation.
Failure to avoid this could result in damage to the product or
its surrounding area.
Operator liability
Prior to using corrosive and abrasive materials for
measurement purposes, the operator must check the level of
resistance of all parts coming into contact with the materials to
be measured.
ABB will gladly support you in selecting the materials, but
cannot accept any liability in doing so.
The operators must strictly observe the applicable national
regulations with regard to installation, function tests, repairs,
and maintenance of electrical devices.
Qualified personnel
Installation, commissioning, and maintenance of the device
may only be performed by trained specialist personnel who
have been authorized by the plant operator. The specialist
personnel must have read and understood the manual and
comply with its instructions.
Returning devices
Use the original packaging or suitably secure shipping package
if you need to return the device for repair or recalibration
purposes.
According to EU guidelines and other local laws for hazardous
materials, the owner of hazardous waste is responsible for its
disposal. The owner must observe the proper regulations for
shipping purposes.
All devices sent back to ABB must be free from any hazardous
materials (acids, alkalis, solvents, etc.).
Disposal
ABB actively promotes environmental awareness and has an
operational management system that meets the requirements
of ISO 9001:2015, ISO 14001:2015, and OHSAS 18001:2007.
Our products and solutions are intended to have minimum
impact on the environment and persons during manufacturing,
storage, transport, use and disposal.
This includes the environmentally friendly use of natural
resources. ABB conducts an open dialog with the public
through its publications.
This product/solution is manufactured from materials that can
be reused by specialist recycling companies.
Information on WEEE Directive 2012/19/EU
(Waste Electrical and Electronic Equipment)
This product or solution is subject to the WEEE Directive
2012/19/EU or corresponding national laws. Starting from
August 15th 2018, electrical and electronic equipment marked
with the crossed-out wheeled bin symbol may not be disposed
as unsorted municipal waste. Waste of electrical and electronic
equipment (WEEE) shall be treated separately using the
national collection framework available to customers for the
return, recycling and treatment of WEEE.
Proper disposal prevents negative effects on people and the
environment, and supports the reuse of valuable raw materials.
ABB can accept and dispose of returns for a fee.
Transport and storage
• After unpacking the pressure transmitter, check the device
for transport damage.
• Check the packaging material for accessories.
• During intermediate storage or transport, store the
pressure transmitter in the original packaging only.
For information on permissible ambient conditions for storage
and transport, see chapter “4 Handling and storage” and
product datasheet. Although there is no limit on the duration of
storage, the warranty conditions stipulated on the order
acknowledgment from the supplier still apply.
Safety information for electrical installation
Electrical connections may only be established by authorized
specialist personnel in accordance with the electrical circuit
diagrams. The electrical connection information in the manual
must be observed; otherwise, the applicable protection type
may be affected. Ground the measurement system according
to requirements.
WARNING
CAUTION
NOTICE
IMPORTANT