Tel: (888) 552-6467 Fax: (800) 316-4515
03/24 750.2095 Rev. B
Nexus®Pro GATEWAY
1/4
© 2024 ABB. All rights reserved.
Nexus®Pro GATEWAY
Scan to download Nexus
®
Pro app for commissioning
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should always be taken including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.
All servicing should be performed by qualified service personnel.
2.
All unused wires must be capped to prevent shorting.
3.
Do not use outdoors.
4.
Do not let power supply cords touch hot surfaces.
5.
Do not mount near gas or electric heaters.
6.
Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized
personnel.
7.
Only use accessory equipment provided by the manufacturer for this product.
8.
Make sure all cables, plugs and power supply are in good condition and meets all product requirements and standards.
9.
Only connect the external power supply to a mating receptacle.
10.
Only connect power to fully assembled Gateway once installation is complete per steps in this document.
11.
Do not use this equipment for other than its intended use.
12.
Unit to be installed only as per configuration described in this document.
WARNING:
• This document outlines general directives highlighting some safety and cautionary indications. Failing to respect these proposed
methods (of installation, use and maintenance) could harm persons, damage devices or make them less safe.
• This document is not intended as substitute for a suitable training, qualifications or experience with the safety procedures for this
device.
• For products provided with communication, the purchaser, the installer or the final customer is responsible for applying all the IT
security measures to prevent risks arising from the connection to communication networks. Risks include, but are not limited to: the use
of the product by unauthorized persons, the alterations of its normal operation, access to and modification of information.
• The purchaser, installer and/or final customer have responsibility to ensure that the operating devices are safely locked, that safety
warnings and notices are properly displayed and that all access points are secured.
• All the information contained in this document is based on the latest information available at the time of publication. We reserve the
right to modify the document without prior notice.
For further information, explanations or specific problems contact your ABB sales representative.
WARNING:
Risk of Electrical Shock.
Disconnect Power before Installation and Maintenance.