ABB MREL-01, Руководство пользователя

Страница: 10 / 14

10
Start-Up
Start-Up
To configure the operation of the relays added using the MREL-01
module:
1. Power up the drive.
2. In ACS350, set the parameter 9801 EXTENSION SEL to 2
(MREL). See the User’s Manual of the drive for more information
on parameters.
3. Use the control panel on the drive and set the parameters for relay
outputs 2 to 4 in Group 14 – Relay Outputs. Refer to the User’s
Manual of the drive for parameter descriptions, and for instruction
on the control panel operation.