REACTOR.DOC 11/8/99
Batch Reactor Demonstration
The main batch display is arranged as shown below:
1.
Activity:
Step through the tag displays (Main batch display, TIC-100, TIC-101, Fill )
Look for:
Batch in AUTO, OFF (non running), setpoint LOC
Master temperature controller TIC-100 setpoint 100ºF
Slave temperature controller TIC-101 setpoint 200ºF
Product A and B flow 0 GPM
Level in vessel 0.0” H
2
O
Benefit:
The operator can display and manipulate on one instrument, all process and calculated
values associated with the process unit, including both sequence and continuous control.
2.
Activity:
Display tuning pages for TIC-100 and TIC-101
Hold down Scroll key to access tuning displays
Look for:
Tuning displays for controller algorithm type, controller action, gain, reset
Benefit:
Commissioning activity can take place through front panel of instrument
3.
Activity:
Display recipe selection by returning to main batch display and holding down
scroll key
Enter tuning password of 1 (if required; the tuning password from the previous
activity may still be in effect)
Select recipe 1 using up/down arrows and ENT
Look for:
Once tuning password is entered the recipe can be scrolled between the choices
of Recipe 1 and Recipe 2
Benefit:
Recipe selection can be done from the front panel
Access to recipes and parameters can be restricted using passwords
Keys may be assigned different functions from different displays depending on
application and operational needs
Selected recipe
Batch status
(OFF/RUN)
Temperature
setpoint
Current step
TAG
A
R/L
MODCELL
TM
2050
RECIPE 1
AUTO
OFF
OFF
REM
Mode or
Time in Step
Change mode
(auto/manual)
Start/stop batch
Temp SP
Steps
(cumulative)
