ABB LevelMaster 7100, Руководство пользователя, Страница: 23 / 100

LevelMaster 7100 User manual 2105835 Rev AA | 13
Table 2 describes the LevelMaster parts list. The list is for the convenience of those who receive the LevelMaster in a kit form.
Some parts may be connected to, or already installed in, other individual parts, but should be accounted for before starting the
installation.
IMPORTANT NOTE: Components and replacement kits with other part numbers may be available. Contact ABB
for additional details or if the list provided does not meet the site requirements.
Table 2: LevelMaster parts list
Qty Part name Description Part number Notes
1 Sensor assembly
Sensor coil assembly
Shipped inside of the casing. It has the same
length as the casing.
It has a ribbon cable coming out one end
terminated with a 16-pin connector.
Number is
different for
each sensor
length
supported.
The sensor assembly must remain
inside the casing to avoid damage
to the coil.
1 Electronic enclosure
Approximately 3 ½ inch diameter x 6 inch
long with a screw-on cover
None Houses the electronics board
1 Top cap
Aluminum bushing that screws on to the top
of the casing, leaving a ¾ inch NPT threaded
female opening
None
1 Nipple
¾ inch pipe nipple located between the top
cap bushing and the electronics enclosure
None
1
or
2
Float
1, 2, or 3 inch diameter
Number is
different for
each type of
float
Float types: passive or active
(inlcuding batteryless)
Liquid type: Oil or water
Two floats are required for an oil
and water application.
2018392-017
Batteryless float kit requires board
with part number 2104836-001.
Oil level float part number
2103766-006
Water level float part number
2103766-007
1 Electronic headboard
Approximately 2 ½ inch x 4 inch. It may be
shipped inside the electronics enclosure.
2104836-001
Firmware version 7.0
Required for batteryless floats
Supports all existing types
2018546-005
Legacy part is available while
supplies last.
Optional parts list
Table 3 describes optional parts used in LevelMaster installations.
Table 3: LevelMaster optional parts list
Qty Part name Description Part number Notes
1 Installation clamps
Aid in the assembly and
installation of LevelMasters
received as a kit
1801393-001
1 Tank port bushing
3 inch NPT male x 2 inch
NPT female reducer
bushing or 4 inch NPT
male x 2 inch NPT female
reducer bushing,
depending on the tank port
opening size
1291003-023 (3 inch)
1291003-024 (4 inch)
Mounting kit to secure unit to the tank
1 Cord connector
2 inch NPT male cord
connector that screws into
the tank port bushing
1291026-008