Smart Buildings
Product Overview
Note about navigation in the PDF: Key combination 'Alt +
IS/S 8.1.1, ISP/S 8.1.1 | 9AKK107992A0761 EN Rev. B 31
left arrow' jumps to the previous view/page
3.7
Power supply
The following options for power supply are available:
•
6-pin terminal block
You will find information on connecting the supply voltage here:
4.3 Connecting the terminal blocks on page 34
3.8
Ethernet ports
You can connect terminal devices and other segments at the ports of the device via twisted pair cables.
You find information on pin assignments for making patch cables here:
3.4.5 Ethernet Ports on page 18
see ISP/S 8.1.1.1 IP-Swich PoE
3.5.5 Ethernet PoE Ports on page 27
3.8.1
10/100-Mbit/s twisted pair port
This port is an RJ45 socket.
The 10/100 Mbit/s twisted pair port allows you to connect network components according to the
IEEE 802.3 10BASE-T/100BASE-TX standard.
This port supports:
•
Autonegotiation
•
Autopolarity
•
Autocrossing
•
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
•
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
