ABB IRBP, Руководство по эксплуатации продукта

Страница: 157 / 334

4.4 Positioner Interface IRBP K/R
General
This section describes the I/O configuration for positioner IRBP K/R.
I/O board Configuration for positioner
Re-
lay/Out-
put Ana-
log/Out-
put Ana-
log/In-
put Digit-
al/Out-
put Digit-
al/Input Type Name Address
Simulated digit-
al I/O B_POS_SIM -
- - - 12 7 Digital I/O DRIVO_1
1
Internal
bus
1) The number relates to the drive module where the I/O board is located, the
example shows DM1.
Simulated outputs for B_POS_SIM
Simulated outputs
Description Name UnitMap
Activate mechanical unit 1 soACT_STN1 0
Activate mechanical unit 2 soACT_STN2 1
Activate mechanical unit 3 soACT_INTCH 2
Simulated inputs
Description Name UnitMap
Mechanical unit 1 activated siSTN1_ACT 0
Mechanical unit 2 activated siSTN2_ACT 1
Mechanical unit 3 activated siINTCH_ACT 2
I/O-Signals configuration for DRIVO_1
Digital outputs TB4
Connected to
unit Description Name UnitMap Output
Positioner Activate mechanical unit 1 doACT_K1 0 1
Positioner Activate mechanical unit 2 doACT_K2 1 2
2 3
3 4
Positioner Activate mechanical unit 3 doACT_K5 4 5
Positioner Activate release break 1 doACT_K11 5 6
Positioner Activate release break 2 doACT_K12 6 7
7 8
8 9
Continues on next page
Product manual - IRBP /D2009 157
3HAC037731-001 Revision: T
© Copyright 2010-2020 ABB. All rights reserved.
4 Configuration
4.4 Positioner Interface IRBP K/R