ABB IRB 7600 - 500/2.55, Руководство по эксплуатации продукта

Страница: 214 / 482

3 Maintenance
3.6.1. Flushing a contaminated gearbox
3HAC022033-001 Revision: E 212
©
Co
py
rig
h
t 200
4 - 20
08 ABB.
All r
ig
h
ts r
e
se
rv
ed
.
Flushing
The procedure below details how to flush a contaminated gearbox. The procedure is the same
for all gearboxes.
Action Note
1. Run the Service program until the castings of the
gearboxes axis 4, 5 and 6 have reached a
temperature of about 30-35º C. Use the finger tips to
measure the temperature.
Recommended service program
detailed in section above:
Service program .
2. Drain the gearbox properly. Described in section above:
Draining the gearbox properly
on page 211
.
3. Fill the gearbox with 700 ml of lubricating oil . Shell Tivela S 150 (001A9646)
Art. no . is specified in Required
equipment on page 211 .
4. Refit the oil plug. Tightening torque: 24 Nm.
5. Run the Service program at low speed (25%) during
10 minutes.
6. Drain the gearbox properly.
7. Repeat the steps above until the gearbox is flushed
three times.
Continued