ABB IRB 6620, Руководство по эксплуатации продукта

Страница: 118 / 360

Interval Equipment Maintenance activity
First change when DTC
ii
reads:
• 6,000 hours
Second change when DTC
ii
reads:
• 24,000 hours
Following changes:
• Every 24,000 hours.
Oil in axis-3 gearbox Change
Every 24,000 hours. Oil in axis-4 gearbox Change
Every 24,000 hours. Oil in axis-5 gearbox Change
First change when DTC
ii
reads:
• 6,000 hours
Second change when DTC
ii
reads:
• 24,000 hours
Following changes:
• Every 24,000 hours.
Oil in axis-6 gear Change
Every:
• 40,000 hours .
Robot Overhaul
36 months or battery low alert
iii
Battery pack, measurement
system of type RMU101 or
RMU102 (3-pole battery con-
tact) Replacement
Battery low alert
iv
Battery pack, measurement
system with 2-pole battery
contact, e.g. DSQC633A Replacement
i
Replace when damage or cracks is detected or life limit is approaching that specified in section
Expected component life on page 119 .
ii
DTC = Duty Time Counter. Shows the operational time of the robot.
iii
The battery low alert (38213 Battery charge low ) is displayed when the battery needs to be replaced.
The recommendation to avoid an unsynchronized robot is to keep the power to the controller turned
on until the battery is to be replaced.
See the replacement instruction for more details.
iv The battery low alert (38213
Battery charge low ) is displayed when remaining backup capacity
(robot powered off) is less than 2 months. The typical lifetime of a new battery is 36 months if the
robot is powered off 2 days/week or 18 months if the robot is powered off 16 h/day. The lifetime
can be extended with a battery shutdown service routine. See
Operating manual - IRC5 with
FlexPendant for instructions.
Activities and intervals, optional equipment
The following table specifies the required maintenance activities and intervals for
common optional equipment. The maintenance of other external equipment for the
robot is detailed in separate documents.
Note Interval Equipment Maintenance activity
Every: Signal lamp Inspection
12 months
Every: Mechanical stop axis 1
and 3 Inspection
12 months
118 Product manual - IRB 6620
3HAC027151-001 Revision: T
© Copyright 2006-2018 ABB. All rights reserved.
3 Maintenance
3.2.2 Maintenance schedule
Continued