Note
Art. no.
Equipment, etc.
For lubricating the o-ring.
3HAB3537-1
Grease
M10x150
3HAC13120-2
Guide pins
For guiding the motor.
Guide pins are to be used in pairs!
3HAC14586-1
Lifting accessory, motor
axes 2-3
M16x90
-
Lock screw
For securing the lower arm.
Used to reach the attachment
screws for the motor.
3HAC023760-001
Bits extension
24 VDC, 1.5 A
-
Power supply
For releasing the brakes.
Used to rotate the motor pinion
when mating it to the gear, when
brakes are released with 24 VDC
power supply.
Rotation tool
Content is defined in section
.
Standard toolkit
These procedures include refer-
ences to the tools required.
Other tools and procedures
may be required. See refer-
ences to these procedures
in the step-by-step instruc-
tions below.
See chapter
.
Circuit diagram
Deciding calibration routine
Decide which calibration routine to be used, based on the information in the table.
Depending on which routine is chosen, action might be required prior to beginning
the repair work of the robot, see the table.
Note
Action
Decide which calibration routine to use for
calibrating the robot.
•
Reference calibration. External cable
packages (DressPack) and tools can
stay fitted on the robot.
•
Fine calibration. All external cable
packages (DressPack) and tools
must be removed from the robot.
1
Follow the instructions given in the refer-
ence calibration routine on the FlexPendant
to create reference values.
If the robot is to be calibrated with refer-
ence calibration:
Find previous reference values for the axis
or create new reference values. These val-
ues are to be used after the repair proced-
ure is completed, for calibration of the ro-
bot.
Creating new values requires possibility to
move the robot.
Read more about reference calibration for
Axis Calibration in
.
If no previous reference values exist, and
no new reference values can be created,
then reference calibration is not possible.
Read more about reference calibration for
Pendulum Calibration in
Operating manu-
al - Calibration Pendulum
.
Continues on next page
Product manual - IRB 460
295
3HAC039842-001 Revision: P
© Copyright 2012-2018 ABB. All rights reserved.
4 Repair
4.5.2 Replacing motors, axes 2 and 3
Continued
Содержание IRB 460 Series
