46
Withdraw the instrument
from the case
Remove tamper-proof
seal (if fitted)
Switch off the power to
the instrument and unscrew
the jacking screw securing
the instrument to the case.
Set the yellow Security switch to the
'Configuration Level Not Protected' position
Configuration Level Not Protected
Configuration Level Protected
1
2
3
4
Red Switch
(see
Note
below)
Re-apply power to the
instrument and wait for
the Operator Level to display
5
Access the Configuration Level
as shown in Fig. 4.1
6
Refit the instrument to the case
and secure with the jacking screw
7
Note.
The Internal Security Switch is used to access the Configuration level when 'Configuration security' is set to
'Switch protected' – see Section 4.4.4.
Do Not
use the switch to access the Configuration level when 'Configuration
security' is set to 'Password protected' (default setting) unless the Password has been forgotten. The switch
overrides Password protection, enabling free access to the Configuration level.
Note.
The red switch is for factory use only. Ensure that it
remains in the position closest to the rear of the instrument.
Fig. 4.2 Setting the Security Switch
…4.1.3
Configuration Level Access – Figs. 4.1 and 4.2
…4
CONFIGURATION
Содержание InformIT SM2000
Страница 1: ...InformIT Advanced Videographic Recorder SM2000 User Guide IM SM2000_7 ...
Страница 43: ...41 3 SETUP Fig 3 9 Channel Data File Sample Binary Format Fig 3 10 Alarm Event Log Sample Binary Format ...
Страница 44: ...42 Fig 3 11 Totalizer Log Sample Binary Format Fig 3 12 Audit Log Sample Binary Format 3 SETUP ...