HVC-R 107/160 V2 E-BUS CHARGER - USER MANUAL
D OCU MEN T N O.: 9AK K108467A663 5-EN V0.3 | DATE: 20/ 1 2/2022 PAGE
17
OF
20
2. Locate the main switch (A).
3. Turn the handle counterclockwise to the horizontal position, marked with “0”.
WARNING
Switching off the charger does not switch off Depot Charge Box GEN2. Each box has
its own power supply. To turn off the Depot Charge Box GEN2 see chapter 0
To switch the charger back on, turn the handle clockwise to the vertical position, marked with “1”. After
about a minute the indicator light (beacon) will turn green.
NOTICE
Operating the main switch is quite arduous. Use both hands if needed and be careful
not to injure yourself.
4.4.3 Switch the Depot Charge Box GEN2
In case it is necessary to switch off the Depot Charge Box GEN2, this can be done by turning off the
main switch:
1. Open the front door.
2. Locate the main switch (B).
3. Move the MCB switch down (OFF position). Green painting on the switch should be visible
NOTICE
Every box has its own power supply line.
Following procedure should be performed for every box which should be powered off.