ABB HDP Series, Руководство пользователя

Страница: 25 / 28

9AKK105975, Rev. A 06-2013 | ABB Motors and Generators EN – 25
6.2.3 Lubrication intervals and amounts
The interval between regreasing depends a great deal on
what the motor is used for, the operating speed of the
motor, the ambient temperature and the load type.
In the following tables, suggested lubrication intervals are
given for the most common bearing types in operating
hours, assuming an ambient temperature of 20 °C (bear-
ing temperature approx. 70 °C)
For special bearing types or operating conditions, the
lubrication interval can be requested from ABB.
Motor Speed [RPM]
500 1000 1500 2000 2500 3000 4000
Motor Bearing type Amount of
grease [g]
Lubrication intervals in duty hours per each motor speed [h]
h100 DE 6308 10 - 25000 20000 16000 12000 10000 6000
NDE 6206 PERMANENTLY GREASED
h132 DE 6310 30 24000 24000 18500 14500 11000 9000 5600
NDE 6308 - PERMANENTLY GREASED
h160 DE 6312 40 24000 23000 17500 13500 12000 8000 -
NDE 6309 - PERMANENTLY GREASED
h200 DE 6315 60 18000 15000 11500 8000 6000 - -
NDE 6314 50 25000 15000 12000 9000 7000 - -
h250 DE 6322 120 13000 10000 6000 3000 2000 - -
NDE 6319 90 20000 13000 10000 6000 4000 - -
Motor Speed [RPM]
500 1000 1500 2000 2500 3000 4000
Motor Bearing type Amount of
grease [g]
Lubrication intervals in duty hours per each motor speed [h]
h100 DE NU308 10 - 12000 10000 8000 6000 5000 2000
NDE 6206 PERMANENTLY GREASED
h132 DE NU310 30 12000 12000 9000 7000 5500 4500 3000
NDE 6308 - PERMANENTLY GREASED
h160 DE NU312 40 12000 11500 8500 6500 5000 4000 2000
NDE 6309 - PERMANENTLY GREASED
h200 DE NU315 60 9000 7500 5500 4000 3000 2000 500
NDE 6314 50 25000 15000 12000 9000 7000 - -
h250 DE NU322 120 6500 5000 3000 1500 1000 - -
NDE 6319 90 20000 13000 10000 6000 4000 - -
WARNING
The maximum operating temperature of the grease
and bearings must not be exceeded.
The designed maximum speed of the motor must
not be exceeded.