Connection and installation
Product manual 2CKA001473B9364
│
16
5. Turn the thermostat until it is tight.
– Finally, remove the identification
label and glue it into the list (at
System Access Point).
Inserting the batteries
1. Press the lever underneath the
device towards the battery lid.
2. Lever out the battery lid.
3. Pull out the battery compartment.
4. Insert batteries into the battery
compartment.
Check that the polarity is correct!
5. Slide in the battery compartment
again until the lever engages.
– The LED flashes briefly (battery
function test).
– The device then carries out an
adjustment operation.
Only for the Comfort version
:
"ADA" appears in the display.
The device is now ready for
commissioning.