6.2
Logging off
GUID-0FDDB51B-D1C2-4442-AAE5-865BC39AE253 v1
The user is automatically logged off after the display timeout. The IED returns to a
state where only reading is enabled. Manual logoff is also possible.
1.
Press
.
2.
To confirm logoff, select
Yes
and press
.
IEC12000159-3-en.vsd
IEC12000159 V3 EN-US
Figure 26:
Logging off
•
To cancel logoff, press
.
6.3
Saving settings
GUID-47AFC39B-6EE3-40BB-8EB7-FAFBD1120F5E v3
Editable values are stored in the nonvolatile flash memory. Most of the parameter
changes take effect immediately after storing, but some parameter changes require
application restart. Values stored in the flash memory remain in effect also after
reboot.
1.
Press
to confirm any changes.
2.
Press
to move upwards in the menu tree or
to enter the Main Menu.
3.
To save the changes in nonvolatile memory, select
Yes
and press
.
•
To exit without saving changes, select
No
and press
.
•
To cancel saving settings, select
Cancel
and press
.
Pressing
Cancel
in the Save changes dialog closes only the Save
changes dialog box, but the IED remains in the editing mode. All
the changes applied to any setting are not lost, and changing
settings can continue. To leave the change setting mode, select
No
or
Yes
in the Save changes dialog.
After changing the parameters marked with the exclamation mark
“!”, the IED restarts automatically for the changes to take effect.
1MRK 511 454-UEN A
Section 6
Local HMI use
GMS600 1.3
39
Cyber security deployment guideline