![background image](http://html.mh-extra.com/html/abb/fpba-01-profibus-dp/fpba-01-profibus-dp_user-manual_197048.webp)
48 Start-up
FPBA-01 configuration parameters – group C (group 3)
Note:
The actual parameter group number depends on the drive
type. Group C (group 3) corresponds to:
•
parameter group 54 in ACS355
•
parameter group 52 in ACSM1, ACS380, ACS580, ACS850,
ACQ580, and ACQ810
•
parameter group 52 in ACS880 and ACS880-M04 if the
adapter is installed as fieldbus adapter A or group 55 if the
adapter is installed as fieldbus adapter B.
No.
1)
Name/Value
Description
Default
01
FBA data in 1
(drive to master)
Selects the resolution of status word
(16 bit or 32 bit) sent by the drive.
4 or
14
2)
4
= SW 16bit
Status word (16 bits)
14
= SW 32bit
Status word (32 bits)
02
FBA data in 2
(drive to master)
Selects data word 1 sent by the drive
over the PROFIBUS network. The
content is defined by a decimal
number in the range of 0 to 9999 as
follows:
See also
on page
0 or 5
3)
0
= None
Not used
4
= SW 16bit
Status word (16 bits)
5
= Act1 16bit
Actual value ACT1 (16 bits)
6
= Act2 16bit
Actual value ACT2 (16 bits)
14
= SW 32bit
Status word (32 bits)
15
= Act1 32bit
Actual value ACT1 (32 bits)
16
= Act2 32bit
Actual value ACT2 (32 bits)
0
Not used
1…99
Virtual address area
of drive control
101…9999
Parameter area of the
drive
Содержание FPBA-01 PROFIBUS DP
