![background image](http://html.mh-extra.com/html/abb/fpba-01-profibus-dp/fpba-01-profibus-dp_user-manual_197046.webp)
46 Start-up
FPBA-01 configuration parameters – group B (group 2)
Note:
The actual parameter group number depends on the drive
type. Group B (group 2) corresponds to:
•
parameter group 55 in ACS355
•
parameter group 53 in ACSM1, ACS380, ACS580, ACS850,
ACQ580, and ACQ810
•
parameter group 53 in ACS880 and ACS880-M04 if the
adapter is installed as fieldbus adapter A or group 56 if the
adapter is installed as fieldbus adapter B.
No.
1)
Name/Value
Description
Default
01
FBA data out 1
(master to
drive)
Selects the resolution of control word
(16 bit or 32 bit) received by the drive.
1 or
11
2)
1
= CW 16bit
Control word (16 bits)
11
= CW 32bit
Control word (32 bits)
02
FBA data out 2
Selects data word 1 received by the
drive over the PROFIBUS network.
The content is defined by a decimal
number in the range of 0 to 9999 as
follows:
See also
.
0 or
24
4)
0
= None
Not used
1
= CW 16bit
Control word (16 bits)
3)
2
= Ref1 16bit
Reference REF1 (16 bits)
3)
3
= Ref2 16bit
Reference REF2 (16 bits)
3)
11
= CW 32bit
Control word (32 bits)
12
= Ref1 32bit
Reference REF1 (32 bits)
0
Not used
1…99
Virtual address area of
drive control
101…9999 Parameter area of the
drive
Содержание FPBA-01 PROFIBUS DP
