ABB FlexLoader, Руководство по применению

Страница: 19 / 68

2 Description of the product
General
WARNING
Applicable training is required in order to use the product. Incorrect use of the
product can lead to personal injury and material damage. Before commissioning
the product, it is your responsibility to carefully read the chapter
Safety on
page 9 , and to be familiar with the safety devices.
FlexLoader Standard Safety adds safety features needed for a complete robot cell.
It is based on the ABB Pluto programmable safety controller.
It handles emergency stops and protective stops in the cell and ensures safe and
reliable interaction with external equipment.
FlexLoader Standard Safety can be configured and covers a broad range of safety
interface needs.
DANGER
The Pluto program is a critical part of the safety system of the cell. No changes
may be carried out without a qualified inspection and verification of the safety
risks and the behavior of the safety system as a whole.
Area of use
FlexLoader Standard Safety must only be used in cells with intended safety
classification and on the condition that the applicable safety requirements and
standards are followed.
Performance level
The safety functions for ABB’s components (emergency stop and protective stop)
according to this description fulfil the performance level PLd in accordance with
EN ISO 13849:1.
Continues on next page
Application manual - FlexLoader Standard Safety Center 19
3HAC051769-001 Revision: E
© Copyright 2014-2020 ABB. All rights reserved.
2 Description of the product