ABB FlexLoader, Руководство по применению

Страница: 9 / 68

1 Safety
1.1 Introduction
This chapter contains safety information for procedures where there is a risk of
personal injury or damage to property.
Equipment that is part of a fully- or semi-automatic system must always be treated
with care regarding safety.
The users of ABB industrial robots are responsible for ensuring that the applicable
safety laws and regulations in the country concerned are observed, and that the
safety devices necessary to protect people working with the robot system are
designed and installed correctly. Personnel working with the robot must be familiar
with the operation and handling of the robot, as described in the applicable
documents.
• Only personnel with required training are authorized to use the system.
• All received training must be documented in writing.
System integ-
rator
Qualified elec-
trician
Trained service and
maintenance techni-
cian
Trained operat-
or
Activity
X Commissioning
X X Operation
X X Trouble-shooting
X Correction of
mechanical fault
X Correction of elec-
trical fault
X Service
X Maintenance
x = Authorized to perform the activity.
Application manual - FlexLoader Standard Safety Center 9
3HAC051769-001 Revision: E
© Copyright 2014-2020 ABB. All rights reserved.
1 Safety
1.1 Introduction