Lifting Instructions - AKD5 Emax2 2000A Retrofill Breaker
A
Retrofill
Breaker
Fig. 3A
Fig. 3B
Fig. 3C
1. For A
se
KD5 AKT50 Emax2.2 Retrofill Breaker, u
lifting device A as shown in Table 2 along with a
for
ing.
suitable hoist
lift
2. Make sure the lifting device is secured and locked
with the hoist.
3. Lifting hooks (Item no.2, Table 2) can open in/out
within an angle of 7 in the vertical plane
± °
.
4. Lifting hooks can be engaged on the spreader bar
(Item no.1, Table 2) using any one of the two slots as per
the location of the hooking points in the Retrofill Breaker.
. Make sure that the
5
hooks are engaged in the slots
provided as shown in fig. 3C.
.
the
steady
6 While lifting hold
Retrofill Breaker
and
c
it
ontinue to guide , while checking both sides and
both
underneath, so that
sets of pins can be lowered
the
of AKD6 switchgear
and lined up easily with
rail slots
.
. Once the
is resting in the rail lots,
7
ofill Breaker
s
Retr
lifting hooks and m
unhook the
ove the hoisting apparatus
out of the way.
Lifting Instructions
* Refer Table 2
*
Lifting evices - Emax2 Retrofill ircuit reakers 00A-5000A
©2020
D
C
B
6
8
2TSA451029P0000 Rev-B
