ABB DY365 Series, Руководство пользователя

Страница: 12 / 74

En
gli
sh
- 10 -
User manual DY365
ENG
Activate Bluetooth on DY365 device (see page 54).
At the start the app displays the list of the associated DY365 devices. To associate a new device, press the symbol “ ” in the upper
right corner.
All the Bluetooth devices detected nearby are displayed: select the device to be associated from the list.
Note: each device is identified by the product code (for example DY365) and by the serial number (for example 00000020).
These informations can be viewed from the main page of the DY365
Warning: make sure that the DY365 is mains powered, Bluetooth interface is activated and that the display shows the main page (initial).
Otherwise the Bluetooth interface is not active and the device is not visible
Enter the password to associate the DY365 with your device
After successfully completing the procedure, the DY365 is added in the list of the associated devices.
Select the DY365 on which you want to act from the list of the associated devices
Note: communication between the app and the DY365 is point-to-point. This means that,
even in the presence of multiple DY365, the app can communicate with one only at a time.
The DY365 currently connected to the app displays the symbol * immediately after the serial number
The app displays the initial page of the selected DY365. From this page you can:
a. Create new programs that will then be copied to the DY365
b. Change the settings of the DY365
c. View the parameters and associate an alias to the DY365
d. Manually control the relay output/s and activate the random switching function or cycle function.