ABB DWTL1, Руководство пользователя

Страница: 12 / 60

En
gli
sh
- 10 -
User manual DWTL1
Activate Bluetooth on DWTL1 device (see page 45).
At the start the app displays the list of the associated DWTL1 device. To associate a new device, press the symbol “ ” in the upper
right corner.
All the Bluetooth devices detected nearby are displayed: select the device to be associated from the list.
Note: each device is identified by the product code (for example DWTL1) and by the serial number (for example 00000020).
These informations can be viewed from the main page of the DWTL1
Warning: make sure that the DWTL1 is mains powered, Bluetooth interface and that the display shows the main page (initial).
Otherwise the Bluetooth interface is not active and the device is not visible
Enter the password to associate the DWTL1 with your device
After successfully completing the procedure, the DWTL1 is added in the list of the associated devices.
Select the DWTL1 on which you want to act from the list of the associated devices
Note: communication between the app and the DWTL1 is point-to-point. This means that,
even in the presence of multiple DWTL1, the app can communicate with one only at a time.
The DWTL1 currently connected to the app displays the symbol * immediately after the serial number
The app displays the initial page of the selected DWTL1. From this page you can:
a. Create new programs that will then be copied to the DWTL1
b. Change the settings of the DWTL1
c. View the parameters and associate an alias to the DWTL1
d. Manually control the relay output and activate the random switching function or cycle function.