ABB DNP31.0, Техническое описание

Страница: 21 / 28

- 21 -
Data sheet DNP31.0
Issue: 09.2015
Class Code 103 (0x67): ABB Analog Output Object
The ABB Analog Output Object models the analog outputs of the device connected to the DNP31.
There is a separate instance for each analog output available on the device.
Class Attributes
Attribute Access Name Type
Value
2 Get Number of Analog Outputs USINT *1)
*1) The number of analog outputs depends on the device connected to the DNP31. For detailed informa-
tion, please refer to the device manual.
Instance Attributes
Attri-
bute Access Name Type Value
3 Get/Set Analog Output Value INT Output State
Common Services
Service Code Class Instance Service Name
14 (0x0E) No Yes Get_Attribute_Single
16 (0x10) No Yes Set_Attribute_Single
Class Code 105 (0x69): ABB Parameter Object
The ABB Parameter Object provides the parameter for non-modular devices and for the adapter module
(slot 0) of modular devices. The index always corresponds to the parameter number. The attribute is fixed
to 3.
The use of the ABB Parameter Object provides a known public interface to a device’s configuration data.
In addition, this object also provides all the information necessary to define and describe each of a de-
vice’s individual configuration parameters.
This object allows a device to fully identify a configurable parameter by supplying a full description of
the parameter, including minimum and maximum values and a human-readable text string describing the
parameter.
The complete description of an device’s parameters (as of writing UMC100.3) can be found in the device
manual.
Configuration tools obtain the parameter description automatically from the EDS file.
Class Attributes
Attribute Access Name Type
Value
2 Get
Number of Parameters (Max. Instance) USINT *1)
*1) The number of parameters depends on the device connected to the DNP31 (as of writing UMC100.3).
For detailed information, please refer to the device manual.
Instance Attributes
Attribute Access Name Type Value
3 Get/Set *2) Parameter Value LINT Actual value
*2) The Set service is not available for read-only parameters.
Common Services
Service Code Class Instance Service Name
14 (0x0E) No Yes Get_Attribute_Single
16 (0x10) No Yes Set_Attribute_Single