ABB DCS880 series, Руководство пользователя

Страница: 19 / 34

19
H4T hardware
3ADW000803R0101 DCS880 H4T (Tosa) manual en a
Galvanic isolation - T90, A92, F11, F90
The Galvanic isolation is an option for converters size H4T, H6 ... H8 and rated voltages ≤ 1000 V.
It is used to replace the high-ohmic voltage measurement and gives the advantage of a total isolation
between power part and drive electronics.
The transformer T90 and the DC-DC transducer A92 are located outside the converter module. The
internal AC and DC voltage measurement channels are removed and connected to T90 and A92.
Voltage coding
Size
H4T
Unit nominal voltage [V]
U1 [V
AC
]
①
c = 7 (690 V) c = 8 (800 V)
Rated mains voltage [V
AC
] 315 ... 690 360 ... 800
Voltage measurement scaled by type code or parameter
(95.28) 690 800
Measuring board SDCS-PIN-H51 use connector X15
Galvanic isolation
Fuse
F11
1500 V, 5 A
DC-DC transducer A92 P42000D3-0111 (3ADN260008P0001)
Switch position R
G
2
(945 V)
3
(1080 V)
Fuse
F90
1000 V, 10 A
Transformer T90 3ADT745047P0001
Secondary Terminals 2U3
2V3
2W3
2N 2U4
2V4
2W4
2N
①
Rated voltage see the name plate of the unit.