12
DCS800-EP Installation and Start-Up Manual
Requirements for installation
The drive must be installed in an upright position within a cabinet or other enclosure.
The cabinet size, heat dissipation capability and clearances must conform to the
requirements below.
Refer to
Dimensional drawings
for frame details.
See
Cabinet cooling and air flow
for the allowed ambient conditions of the drive.
Minimum clearances
When installing the panel in a cabinet, minimum clearances from the panel to the
cabinet walls, top and bottom must be maintained. This space is required for proper
cabling, cooling air flow, service and maintenance. If one drive is mounted directly
above another, see DCS800 Hardware Manual “Mechanical Installation” for
additional information.
See chapter
Dimensional drawings
.
Frame
X1 (side)
X2 (top)
X3 (bottom)
A
0.5 in.
(13 mm)
5.0 in.
(13 mm)
4.0 in.
(102 mm)
B
0.5 in.
(13 mm)
10.0 in.
(25 mm)
5.0 in.
(127 mm)
C
TBD
D
USFMCC
USFMCC
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
