CP600-WEB
3ADR010989, 1, en_US
5
2
How to
2.1
Format Flash
1.
We need to start the panel in configuration mode, to do this you need to power on the
panel and start tap quickly in the middle of the screen, when the procedure is accepted,
you'll see "
Tap Tap detected, going to config mode
" on screen and after some time the
panel will show you a page with the rotating menu.
2.
Now we need to format the panel so into the rotating menu select the
"Format flash",
set
a pick at
“Uninstall HMI
” and confirm with OK. Wait for the deleting operation to be com-
pleted, this may take some minutes.
3.
Now restart the panel. You should see this screen.
2.2
Install MicroBrowser
1.
Create an empty folder called “Microbrowser”
2.
Extract the “
MicroBrowser 1.5.15.xxx.zip
” file into this folder
3.
Copy the folder “Microbrowser” into an USB pen drive
4.
Plug the USB Flash Drive to the panel
5.
Tap on
“Transfer from disk”
and select the folder “MicroBrowser” on your USB Flash Drive.
After the copy is finished the Windows-CE environment will be started automatically.
6.
Set the IP-Address
of the panel via:
“Start/Settings/Network and Dial-up connections/EMAC1”
7.
Use Shortcut
“Registry Save”
on Desktop to permanently flash the IP-Settings
Содержание CP600-WEB
Страница 1: ... APPLICATION NOTE CP600 WEB MICROBROWSER ...
Страница 8: ......