ABB COMMANDER 1900 Series, Руководство по эксплуатации, Страница: 19 / 44

17
5.4 Totals Page Displays
This page is omitted from both faceplates if the
Totalizer Option
is not fitted. The page is also omitted from faceplate 1 if
Total 1
is set to
OFF
and from faceplate 2 if
Total 2
is set to
OFF
– refer to the
Set Up Totals Page
in the
Advanced Software Options Manual
.
Page Header –Totals Page.
Front Panel (Batch) Flow Total 1 (2)
The batch flow total is calculated from process variable 1 (2).
The flow total can be reset in the next frame if
Reset Enable
in
Set Up Totals
Page
is set to '
ENbL–Y
'.
Counter Reset
The Front (Batch) Flow Total can be reset to the
Preset Value
in
Set Up
Totals Page
if required.
Select ' t1 YES ' to reset the counter ( ' t1 ' indicates
Flow Total 1
).
✶
Note. If the Counter Reset is disabled in
Set Up Totals Page
, the
counter reset frame is omitted.
Counter Stop/Go
Select '
GO
' to start the counter or '
StOP
' to stop it.
✶
Note. If the Counter Stop/Go is disabled in
Set Up Totals Page
, the
frame can be viewed but not altered. If a digital signal is assigned to
Totalizer Stop/Go
, an active digital signal sets the counter to GO and the
Counter cannot be stopped from the front panel.
tOtALS
PAGE
8765
4321
rESEt
t1 NO
t1 YES
COUNt
StOP
GO
StOP
t1 NO
YES
87654321
NO
5 CONTROL OPERATION…