ABB COM 600, Руководство оператора

Страница: 12 / 38

IED information
By clicking on the IED objects you can view their communication status and information
on diagnostic counters. Below each IED in the substation structure you can click on
Disturbances, Parameters or Measurements to access the corresponding data.
It depends on the IED configuration, whether Disturbances,
Parameters or Measurements are shown in the substation
structure.
Communication structure 3.4.2.
You can open the communication view of HMI by clicking on the Communication tab
on the left. The communication structure is displayed in the window on the left. In the
communication structure you can see the OPC Server, communication channel objects
and the IEDs.
You can see the status of the IEDs in the communication structure. If there is a problem
in communication, there is a red cross next to the IED.
communication_view.jpg
Figure 3.4.2-1 The communication view to HMI
12
1MRS756121
COM 600 Station Automation Series COM 605 3.0
Operator's Guide