Display system settings
346
1SVC 440 795 M1100
Activating the password
You can activate an existing password in four different ways:
• automatically when display system is switched on again,
• automatically after a protected circuit diagram is loaded
• automatically if no telegram was sent on the PC interface
for 30 minutes after unlocking (via CL-SOFT) was entered.
• via the password menu
X
Press
DEL
and
ALT
to call up the System menu.
X
Open the password menu via the SECURITY… menu
The display system will only show this menu if a password is
present.
X
Select ACTIVATE PW and press
OK
.
The password is now active. The display system will
automatically return to the status display.
You must unlock the display system with the password
before you implement a protected function, enter a
protected menu or the System menu.
CHANGE PW
ACTIVATE
h
Make a note of the password before you activate it. If the
password is no longer known, the display system can be
unlocked (DELETE FUNCTION is not active), however, the
circuit diagram and data settings will be lost.
Attention!
If the password is unknown or lost, and the password
delete function is not activated: The unit can only be reset
to the factory setting by the manufacturer. The program
and all data will be lost.
Содержание CL Series
Страница 1: ... APPLICATION MANUAL Display system CL range ...
Страница 115: ...112 1SVC 440 795 M1100 ...
Страница 345: ...342 1SVC 440 795 M1100 ...
Страница 427: ...1SVC 440 795 M1100 424 ...