Operation
Product manual 2CKA001373B8563
│45
8.2.1
Changing the operating status (heating/cooling)
Change of heating/cooling operating status for 4-pipe systems
There are four options for changing the heating/cooling operating status:
■
Automatic change
– To do so, configure the device settings on the System Access Point and set a time
switch, e.g..
■
Group switching of several actuators at the System Access Point
– To do so, form a group of actuators of the same type at the System Access Point and
issue a command to all group members.
■
Switching by external mechanical triggering sensors or actuators connected to the physical
input.
– For this purpose, suitable sensors/actuators must be connected and configured.
Physical input switching will become the master control.
■
Local setting on the device by pressing and holding the On/Off button. Then adjust the
temperature setpoint.
The current operating status is indicated by the corresponding symbol in the device display.
Heating operating status active.
Cooling operating status active.
