17
tOtALS
PAGE
8765
4321
rESEt
t1 NO
t1 YES
COUNt
StOP
GO
StOP
t1 NO
YES
87654321
NO
5
CONTROL OPERATION…
Page Header –
Totals Page
.
Front Panel (Batch) Flow Total 1 (2)
The batch flow total is calculated from process variable 1 (2).
The flow total can be reset in the next frame if
Reset Enable
in
Set Up Totals
Page
is set
to '
ENbL–Y
'.
Counter Reset
The Front (Batch) Flow Total can be reset to the
Preset Value
in
Set Up Totals
Page
if
required.
Select '
t1 YES
' to reset the counter ('
t1
' indicates
Flow Total 1
).
Note.
If the Counter Reset is disabled
in
Set Up Totals
Page
, the counter reset frame
is omitted.
Counter Stop/Go
Select '
GO
' to start the counter or '
StOP
' to stop it.
Note.
If the Counter Stop/Go is disabled
in
Set Up Totals
Page
, the frame can be
viewed but not altered. If a digital signal is assigned to
Totalizer Stop/Go
, an active
digital signal sets the counter to
GO
and the Counter cannot be stopped from the
front panel.
5.4
Totals Page Displays
This page is omitted from both faceplates if the
Totalizer Option
is not fitted. The page is also omitted from faceplate 1 if
Total 1
is set
to
OFF
and from faceplate 2 if
Total 2
is set to
OFF
– refer to the
Set Up Totals
Page
in the
Advanced Software Options Manual
.
