ABB Aztec 600, Руководство пользователя

Страница: 20 / 109

Aztec 600 aluminium, ammonia, color, iron, manganese, phosphate
Single- and multi-stream colorimetric analyzers 4 Installation
IM/AZT6CR–EN Rev. J 17
4.6.2 Ethernet Connections
The Ethernet gland is different from the other connections to
accommodate an RJ45 plug:
1. Referring to steps 1 and 2 in Section 4.6.1, page 16, open
the electronics section door and remove the transparent
cover plate.
2. Referring to Fig. 4.6:
a. Slide retaining clip
A
off blanking plug
B
and
remove the blanking plug.
b. Fit cable gland
C
and secure using nut
D
.
c. Remove gland cover
E
and route cable
F
through it.
d. Fit the rubber split-bush
G
and split-washer
H
over the cable.
e. Route the cable through cable gland
C
and into
the enclosure case.
f. Plug the RJ45 connector
I
into the Ethernet RJ45
connector socket on the application board (see
Fig. 4.7, page 18 for location details) and tighten
gland nut
E
.
3. Referring to step 11 in Section 4.6.1, page 16, refit the
transparent cover plate and close and secure the
electronics section door.
Fig. 4.6 Ethernet Connections
A
B
C
D
E
F
G H
I