ABB AS400, Руководство пользователя

Страница: 7 / 14

4NWP100446R0001_OPM_ABB_AS400RelayCardPowerValue_EN140226 Page 8/15 ABB
Modifications reserved
Input signals
·
Segment 6
User can choose one function for a Segment according to Table 4.
Description “1” “0”
Battery mode shutdown Only Battery mode
shutdown Normal
Any mode shutdown Shutdown Normal
Emergency power off OFF Normal
Remote On/Off OFF ON
Table 4: Input signal on Segment 6
·
Segment 7
This segment is fixed to “UPS On” function.
Description “1” “0”
UPS On ON Normal
Table 5: Input signal on Segment 7
·
Segment 8
This segment is fixed to “UPS Off” function.
Description “1” “0”
UPS Off OFF Normal
Table 6: Input signal on Segment 8
1.4 Configuring the Card
This chapter describes how to install, connect and configure ABB’s AS400 Card.
1.4.1 Serial Data format
AS400 Relay Card data has a 2400 baud rate and consist of 1 start bit, 8 data bits, no parity, and 1 stop bit.
BAUD RATE: 2400 band
DATA LENGTH: 8 bits
STOP BIT: 1 bit
PARITY: NONE
Data format figure:
Start b0 b1 b2 b3 b4 b5 b6 b7 Stop
1.4.2 Installation
The card can be installed in UPS equipped with a communication bay without turning off the UPS or
disconnecting the load.
To install the card:
1. Remove the communication bay cover from the UPS keeping the screws for further use.
2. Slide the card into the open slot and fix it with the screws removed in Step 1.