14
EntelliGuard R Circuit Breaker Retrofill AKD-6 Installation Manual DEH-41548 07/15
Figure 7. Bus, Interior View
Unpack Retrofill Circuit Breaker
By following the procedures below, you should be able to install the breaker with minimum effort and time.
Turn off all power to switchgear. Tagout
and lockout main source, up-stream or main
breaker.
Failure to comply with these instructions will
result in death or serious injury from severe burns
caused by arc flashing that has exceedingly high
temperatures.
Always wear personal protection equipment
according to OSHA standards and appropriate
to the severity of potential burns.
Ensure only qualified personnel install, operate, service, and maintain all electrical
equipment.
