ABB Advant Controller 450, Руководство по эксплуатации продукта

Страница: 80 / 120

Advant Controller 450 Product Guide
3BSE 015 953R201 Rev B 8-2
8.1 Basic Software Licenses
In Table 8-5 the software basic functions licenses are listed. One or more licenses shall
be ordered if the corresponding functions will be used when the controller is running
at the customer‘s site.
License for I/O signals
With I/O signals in the licenses means all physical I/O signals directly connected
to the controller.
If two physical I/O signals are used in a redundancy configuration both signals must be
calculated except when the configurations 2xDSAI 133 + DSTA 002A or 2xDSAI 133A +
DSTA 002B and 2xDSAX 110 + DSTA 001A or 2xDSAX 110A + DSTA 001B are used.
When the number of I/O signals needed are calculated the necessary licenses must be ordered,
for example if the calculated number of I/O signals is 725 the 3 licenses (for 0-208, 209-400,
401-800 I/O signals) are required.
License for CPU redundancy
This license must be ordered if the Advant Controller 450 shall be provided with
redundant CPUs.
PROFIBUS-DP licenses
If PROFIBUS-DP shall be used in the controller this license must be ordered.
One license must be bought for each PROFIBUS-DP used in the controller.
Advant Interface to L
ON
W
ORKS
Network licenses
If L
ON
W
ORKS
Network shall be used in the controller, this license must be ordered.
One license must be bought for each CI572 communication module used in the controller.
8.2 Assembled Delivery or Loose Part Delivery
The item Assembly and test in Table 8-1 determines if the controller shall be mounted in
cabinets or not. If this item is not ordered the delivery will be a loose part delivery.
Note also that in Table 8-1 the items for CE-marking are different for an assembled delivery
and for a loose part delivery.