ABB ACS880 Series, Руководство по прошивке

Страница: 492 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
4 The scaling is defined by parameter 46.1 Speed scaling . Speed
5 The scaling is defined by parameter 46.2 Frequency
scaling .
Frequency
Torque / uint16 Selects the type and scaling of reference 2 received
from the master/follower link. The resulting value is
shown by
3.14 M/F or D2D ref2 .
For the selections, see parameter 60.10 M/F ref1 type .
M/F ref2 type 60.11
Auto / uint16 Selects the type/source and scaling of actual value
ACT1 transmitted to the master/follower link. M/F act1 type 60.12
0 Type/source and scaling follow the type of reference
1 selected by parameter
60.10 M/F ref1 type . See the
individual settings below for the sources and scalings.
Auto
1 Reserved
2 Reserved
3 1.10 Motor torque is sent as actual value 1. The scaling
is defined by parameter 46.3 Torque scaling .
Torque
4 1.1 Motor speed used is sent as actual value 1. The
scaling is defined by parameter 46.1 Speed scaling .
Speed
5 1.6 Output frequency is sent as actual value 1. The
scaling is defined by parameter 46.2 Frequency scaling .
Frequency
Auto / uint16 Selects the type/source and scaling of actual value
ACT2 transmitted to the master/follower link. M/F act2 type 60.13
0 Type/source and scaling follow the type of reference
2 selected by parameter
60.11 M/F ref2 type . See the
individual settings below for the sources and scalings.
Auto
1 Reserved
2 Reserved
3 1.10 Motor torque is sent as actual value 2. The scaling
is defined by parameter 46.3 Torque scaling .
Torque
4 1.1 Motor speed used is sent as actual value 2. The
scaling is defined by parameter 46.1 Speed scaling .
Speed
5 1.6 Output frequency is sent as actual value 2. The
scaling is defined by parameter 46.2 Frequency scaling .
Frequency
None / uint32 (Effective in the master only.) Defines the followers
from which data is read. See also parameters
62.28 … 62.33 .
M/F follower
selection 60.14
2 Data is read from the follower with node address 2. Follower node 2
4 Data is read from the follower with node address 3. Follower node 3
8 Data is read from the follower with node address 4. Follower node 4
6 Data is read from the followers with node addresses 2
and 3. Follower nodes 2+3
10 Data is read from the followers with node addresses 2
and 4. Follower nodes 2+4
492 Parameters