Def / Type
FbEq 16b / 32b
Description
Name / Range /
Selection
No.
0 metric_kiloton /
uint16
Displays the reduction in CO2 emissions in metric
kilotons compared to direct-on-line motor connection.
This value is incremented when parameter
rolls over.
This parameter is read-only (see parameter
).
CO2 reduction in
kilotons
45.8
1 = 1 metric_kiloton /
1 = 1 metric_kiloton
Reduction in CO
2
emissions in metric kilotons.
0...65535
metric_kiloton
0.0 metric_ton /
uint16
Displays the reduction in CO2 emissions in metric tons
compared to direct-on-line motor connection. This
value is calculated by multiplying the saved energy in
MWh by the value of parameter
(by default, 0.5 metric tons/MWh).
When this parameter rolls over, parameter
is incremented.
This parameter is read-only (see parameter
).
CO2 reduction in
tons
45.9
1 = 1 metric_ton / 10
= 1 metric_ton
Reduction in CO
2
emissions in metric tons.
0.0 ... 999.9
metric_ton
Disable / uint16
Enables/disables the energy optimization function.
The function optimizes the motor flux so that total
energy consumption and motor noise level are reduced
when the drive operates below the nominal load. The
total efficiency (motor and drive) can be improved by
1…20 % depending on load torque and speed.
Note: With a permanent magnet motor or a
synchronous reluctance motor, energy optimization is
always enabled regardless of this parameter.
Energy optimizer
45.11
0
Energy optimization disabled.
Disable
1
Energy optimization enabled.
Enable
1.000 units / uint32
Defines energy tariff 1 (price of energy per kWh).
Depending on the setting of parameter
, either this value or
is
used for reference when monetary savings are
calculated.
The currency is defined by parameter
Note: Tariffs are read only at the instant of selection,
and are not applied retroactively.
Energy tariff 1
45.12
- / -
Energy tariff 1.
0.000 ...
4294967.295 units
2.000 units / uint32
Defines energy tariff 2 (price of energy per kWh).
See parameter
.
Energy tariff 2
45.13
- / -
Energy tariff 2.
0.000 ...
4294967.295 units
448 Parameters
Содержание ACS880 Series
