ABB ACS880 Series, Руководство по прошивке

Страница: 384 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
1 = Signal selected by parameter 32.217 Supervision 5
signal is outside its limits.
Supervision 5 active b4
1 = Signal selected by parameter 32.227 Supervision 6
signal is outside its limits.
Supervision 6 active b5
1 = Signal selected by parameter 32.237 Supervision 7
signal is outside its limits.
Supervision 7 active b6
Reserved b7…15
1 = 1 0000h…FFFFh
No action / uint16 Selects the mode of signal supervision function 4.
Determines how the monitored signal (parameter
32.207 Supervision 4 signal ) is compared to its lower
and upper limits (parameters 32.209 Supervision 4 low
and 32.310 Supervision 4 high respectively). The action
is taken when the condition is fulfilled as selected in
parameter
32.206 Supervision 4 action .
Supervision 4 action 32.205
0 Signal supervision 4 is not in use. Disabled
1 A warning ( D20B Signal supervision 4 ) is generated. Low
2 Action is taken whenever the signal rises above its
upper limit. High
3 Action is taken whenever the absolute value of the
signal falls below its (absolute) lower limit. Abs low
4 Action is taken whenever the absolute value of the
signal rises above its (absolute) upper limit. Abs high
5 Action is taken whenever the signal falls below its low
limit or rises above its high limit. Both
6 Action is taken whenever the absolute value of the
signal falls below its (absolute) low limit or rises above
its (absolute) high limit. Abs both
No action / uint16 Selects the action the drive takes when the value
monitored by signal supervision 4 exceeds its limits.
Note: This parameter does not affect the status
indicated by
32.200 Supervision status .
Supervision 4 action 32.206
0 No action taken. No action
1 A warning ( D20B Signal supervision 4 ) is generated. Warning
2 The drive trips on D103 Signal supervision 4 . Fault
3 If running, the drive trips on D103 Signal supervision 4 . Fault if running
Zero / uint32 Selects the signal to be monitored by signal supervision
function 4. Supervision 4 signal 32.207
0 None. Zero
See Terms and abbreviations (page 169) . Other [value]
0.000 s / real32 Defines a filter time constant for the signal monitored
by signal supervision 4. Supervision 4 filter
time 32.208
384 Parameters