ABB ACS880 Series, Руководство по прошивке

Страница: 380 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
Configuration of signal supervision functions 1…3. Supervision 32
Three values can be chosen to be monitored; a warning
or fault is generated whenever predefined limits are
exceeded.
See also section
Signal supervision (page 137) .
- / uint16 Signal supervision status word.
Indicates whether the values monitored by the signal
supervision functions are within or outside their
respective limits. Supervision status 32.1
Note: This word is independent of the drive actions
defined by parameters
32.6 , 32.16 and 32.26 .
1 = Signal selected by 32.7 is outside its limits. Supervision 1 active b0
1 = Signal selected by 32.17 is outside its limits. Supervision 2 active b1
1 = Signal selected by 32.27 is outside its limits. Supervision 3 active b2
Reserved b3…15
1 = 1 0000h…FFFFh
Disabled / uint16 Selects the mode of signal supervision function 1.
Determines how the monitored signal (see parameter Supervision 1
function 32.5
32.7 ) is compared to its lower and upper limits ( 32.9
and 32.10 respectively).
The action to be taken when the condition is fulfilled
is selected by
32.6 .
0 Signal supervision 1 not in use. Disabled
1 Action is taken whenever the signal falls below its lower
limit. Low
2 Action is taken whenever the signal rises above its
upper limit. High
3 Action is taken whenever the absolute value of the
signal falls below its (absolute) lower limit. Abs low
4 Action is taken whenever the absolute value of the
signal rises above its (absolute) upper limit. Abs high
5 Action is taken whenever the signal falls below its low
limit or rises above its high limit. Both
6 Action is taken whenever the absolute value of the
signal falls below its (absolute) low limit or rises above
its (absolute) high limit. Abs both
No action / uint16 Selects the action the drive takes when the value
monitored by signal supervision 1 exceeds its limits. Supervision 1 action 32.6
Note: This parameter does not affect the status
indicated by
32.1 Supervision status .
0 No action taken. No action
1 A warning ( A8B0 Signal supervision ) is generated. Warning
2 The drive trips on 80B0 Signal supervision . Fault
3 If running, the drive trips on 80B0 Signal supervision . Fault if running
380 Parameters