ABB ACS880 N5700 Series, Руководство по прошивке, Страница: 338 / 662

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
1.000 / real32 Defines a divisor for value counter 1. The value of the
monitored signal is divided by this value before
integration. Value counter 1
divider 33.54
- / - Divisor for value counter 1. 0.001 ... 2147483.000
Value counter 1
exceeded / uint32 Selects the optional warning message for value counter
1. Value counter 1 warn
message 33.55
4 A88A Value counter 1 . The message text can be edited
on the control panel by choosing Menu – Settings – Edit
texts.
Value counter 1
exceeded
10 A880 Motor bearing . Maintain motor
bearing
0 / real32 Displays the actual present value of value counter 2.
The value of the source selected by parameter
33.63
Value counter 2 source is read at one-second intervals
and added to the counter. A divisor can be applied to
the count (see
33.64 Value counter 2 divider ).
When the counter exceeds the limit set by 33.61 Value
counter 2 warn limit , bit 5 of 33.1 Counter status is set
to 1.
The warning specified by
33.65 Value counter 2 warn
message is also given if enabled by 33.62 Value counter
2 function .
The counter can be reset from the Drive Composer PC
tool, or from the control panel by keeping Reset
depressed for over 3 seconds.
Value counter 2
actual 33.60
- / - Actual present value of value counter 2. -2147483008...2147483008
- / real32 Sets the limit for value counter 2.
With a positive limit, bit 5 of
33.1 Counter status is set
to 1 (and a warning optionally generated) when the
counter is equal or greater than the limit.
With a negative limit, bit 5 of
33.1 Counter status is set
to 1 (and a warning optionally generated) when the
counter is equal or smaller than the limit.
0 = Counter disabled.
Value counter 2 warn
limit 33.61
- / - Limit for value counter 2. -2147483008...2147483008
- / uint16 Configures value counter 2. Value counter 2
function 33.62
0 = Loop: When the limit is reached, the counter is reset.
The counter status (bit 5 of
33.1 ) switches to 1 for one
second. The warning (if enabled) stays active for at
least 10 seconds.
1 = Saturate: When the limit is reached, the counter
status (bit 5 of
33.1 ) switches to 1, and remains so until
33.60 is reset. The warning (if enabled) also stays active
until 33.60 is reset.
Counter mode b0
Warning enable
0 = Disable: No warning is given when the limit is
reached
1 = Enable: A warning (see
33.65 ) is given when the limit
is reached
Warning enable b1
338 Parameters