ABB ACS880 ESP, Руководство по прошивке

Страница: 138 / 494

138 Parameters
11.42 Freq in 1 min Defines the minimum for the frequency actually arriving at
frequency input 1 (DIO1 when it is used as a frequency
input).
The incoming frequency signal (
11.38 Freq in 1 actual
value ) is scaled into an internal signal ( 11.39 Freq in 1
scaled ) by parameters 11.42 … 11.45 as follows:
0 Hz
0…16000 Hz Minimum frequency of frequency input 1 (DIO1). 1 = 1 Hz
11.43 Freq in 1 max Defines the maximum for the frequency actually arriving at
frequency input 1 (DIO1 when it is used as a frequency
input). See parameter
11.42 Freq in 1 min .
16000 Hz
0…16000 Hz Maximum frequency for frequency input 1 (DIO1). 1 = 1 Hz
11.44 Freq in 1 at scaled
min Defines the value that is required to correspond internally
to the minimum input frequency defined by parameter
11.42 Freq in 1 min . See diagram at parameter 11.42 Freq
in 1 min .
0.000
-32768.000
…32767.000 Value corresponding to minimum of frequency input 1. 1 = 1
11.45 Freq in 1 at scaled
max Defines the value that is required to correspond internally
to the maximum input frequency defined by parameter
11.43 Freq in 1 max . See diagram at parameter 11.42 Freq
in 1 min .
1500.000;
1800.000
(
95.20 b0)
-32768.000
…32767.000 Value corresponding to maximum of frequency input 1. 1 = 1
11.54 Freq out 1 actual
value Displays the value of frequency output 1 after scaling. See
parameter
11.58 Freq out 1 src min .
This parameter is read-only.
-
0…16000 Hz Value of frequency output 1. 1 = 1
11.55 Freq out 1 source Selects a signal to be connected to frequency output 1. Motor speed
used
Zero None. 0
Motor speed used 01.01 Motor speed used (page 105 ). 1
Output frequency 01.06 Output frequency (page 105 ). 3
Motor current 01.07 Motor current (page 105 ). 4
Motor torque 01.10 Motor torque (page 105 ). 6
No. Name/Value Description Def/
FbEq16
11.43
11.39
f
in
( 11.38 )
11.45
11.44
11.42