ABB ACS880-87LC-3200A, Руководство по оборудованию

Страница: 100 / 132

Regulatory Compliance Mark (RCM)
RCM marking is pending. Applies as Compliance with EN 61800-3:2004.
EAC (Eurasian Conformity) marking
EAC (Eurasian Conformity) mark
Product complies with the technical regulations of the Eurasian Customs Union. EAC mark is required
in Russia, Belarus and Kazakhstan.
Compliance with EN 61800-3:2004/A1:2012
￭
Definitions
EMC stands for Electromagnetic Compatibility. It is the ability of electrical/electronic
equipment to operate without problems within an electromagnetic environment. Likewise,
the equipment must not disturb or interfere with any other product or system within its locality.
First environment includes establishments connected to a low-voltage network which supplies
buildings used for domestic purposes.
Second environment includes establishments connected to a network not supplying domestic
premises.
Drive of category C4: drive of rated voltage equal to or above 1000 V, or rated current equal
to or above 400 A, or intended for use in complex systems in the second environment.
￭
Category C4
The requirements of the standard can be met as follows:
100 Technical data