![ABB ACS880-01 Series Скачать руководство пользователя страница 324](http://html.mh-extra.com/html/abb/acs880-01-series/acs880-01-series_firmware-instructions_2621324.webp)
324 Parameters
Displays the status of optional FPTC-xx thermistor protection
modules. The word can be used as the source of eg. external
events.
Note:
The “module found” bits are updated regardless of
whether the corresponding module is activated. However, the
“fault active” and “warning active” bits are not updated if the
module is not activated. Modules are activated by parameter
This parameter is read-only.
-
0000h…FFFFh
FPTC-xx status word.
1 = 1
Selects the source from which measured temperature 1 is
read.
For wiring examples, see the hardware manual of the drive.
Usually this source is from a sensor connected to the motor
controlled by the drive, but it could be used to measure and
monitor a temperature from other parts of the process as long
as a suitable sensor is used as per the selection list.
Disabled
None. Temperature monitoring function 1 is disabled.
0
Estimated
temperature
Estimated motor temperature (see parameter
).
The temperature is estimated from an internal drive
calculation. It is important to set up the ambient temperature
of the motor in
1
No.
Name/Value
Description
Def
/
FbEq16
Bit
Name
Description
0
Module found in slot 1
1 = Yes: An FPTC-xx module has been detected in slot 1.
1
Fault active in slot 1
1 = Yes: The module in slot 1 has an active fault (
).
2
Warning active in slot 1 1 = Yes: The module in slot 1 has an active warning (
).
3
Module found in slot 2
1 = Yes: An FPTC-xx module has been detected in slot 2.
4
Fault active in slot 2
1 = Yes: The module in slot 2 has an active fault (
).
5
Warning active in slot 2 1 = Yes: The module in slot 2 has an active warning (
).
6
Module found in slot 3
1 = Yes: An FPTC-xx module has been detected in slot 3.
7
Fault active in slot 3
1 = Yes: The module in slot 3 has an active fault (
).
8
Warning active in slot 3 1 = Yes: The module in slot 3 has an active warning (
).
9…15 Reserved
Содержание ACS880-01 Series
