ABB ACS800-67LC, Руководство по оборудованию

Страница: 130 / 154

130 Technical data
Applicable standards
Grid codes
See ACS800-67LC wind turbine converters system description and start-up guide
[3AUA0000059432 (English)].
CE marking
A CE mark is attached to the converter to verify that the unit follows the provisions of the
European Low Voltage and EMC Directives.

Compliance with the European Low Voltage Directive
The compliance with the European Low Voltage Directive has been verified according to
standard EN 61800-5-1 and applicable parts of standard EN 60204-1.

Compliance with the European EMC Directive
See section Compliance with the EN 61800-3 .
Compliance with the European Machinery Directive
The converter complies with the European Machinery Directive requirements for a partly
completed machinery.
The converter complies with the standards below. The compliance with the
European Low Voltage Directive is verified according to standards EN 61800-5-1
and EN 60204-1.
• IEC/EN 60204-1:2006 Safety of machinery. Electrical equipment of machines. Part 1: General
requirements. Provisions for compliance: The final assembler of the machine is
responsible for installing
- an emergency-stop device.
• IEC/EN 60529:2001 Degrees of protection provided by enclosures (IP code).
• IEC/EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems. Part 1: Principles,
requirements and tests.
• IEC/EN 61400-1:2005 Wind turbines. Part 1: design requirements.
• IEC/EN 61800-3:2004 Adjustable speed electrical power drive systems. Part 3: EMC requirements and
specific test methods.
• IEC/EN 61800-5-
1:2007
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements –
electrical, thermal and energy.
• UL 50 Twelfth Edition. Enclosures for Electrical Equipment, Non-Environmental
Considerations.
• UL 508A First Edition. Industrial Control Panels.