manualshive.com logo in svg

ABB ACS800-07-0610-3, Руководство по оборудованию, Страница: 32 / 193

Поделиться
Скачать
ABB ACS800-07-0610-3 Скачать руководство пользователя страница 32

Hardware description

26

Controls

Door switches

Load switch-disconnector

The drive has a load switch-disconnector handle. In units without an optional load 
switch-disconnector (+F253), the handle operates the internal switch-disconnector 
contained within each supply module.

WARNING!

 The load switch-disconnector does not switch off the auxiliary voltages 

inside the cabinet. In units without F253, the switch-disconnector does not 
switch off the voltage at the input terminals of the supply module(s).

Note:

 On units without the line contactor option (+F250) and the load switch-

disconnector option (+F253), the supply unit will start rectifying as soon as the 
switch-disconnector(s) within the supply module(s) is closed.

Auxiliary voltage switch

The auxiliary voltage switch controls the voltage supply to the auxiliary voltage 
transformer.

Earthing/Grounding switch

An earthing/grounding switch for temporary grounding is optionally available.

Other door controls

The following switches are mounted on the door of the control and I/O cubicle:

Emergency stop button

(optional)

Operating switch (units with 
main contactors only)

“START” position closes the 
main contactors and the supply 
unit starts rectifying. In the 
“OFF” position, the main 
contactors are open.

Supply unit fault reset

button

Auxiliary voltage switch-disconnector (not shown)

Controls the power supply to the auxiliary voltage 
transformers, ground fault supervision, motor fan 
supply, and the voltage display of the DSSB board.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

Содержание ACS800-07-0610-3


































































































































































































Отзывы:

Нет отзывов