ABB ACS580 Series, Руководство по оборудованию

Страница: 86 / 468

Installing the drive
￭ Installing the drive vertically, frames R1…R4
The figures show frame R3 as an example.
Select fasteners and their application to meet local requirements appropriate to
wall surface materials, drive weight and application.
1. Mark the hole locations using the mounting template included in the package.
Do not leave the mounting template under the drive. The drive dimensions
and hole locations are also shown in the drawings in chapter
Dimension
drawings (page 363) .
2. Drill the mounting holes.
3. Insert anchors or plugs into the holes and start the bolts into the anchors or
plugs.
a
b
1 2 3
×4
×4
×4
R1…R2: M5 (#10)
R3…R4: M6 (¼ in)
R4 v2 R4 R3 R2 R1
in mm in mm in mm in mm in mm
6.30 160 6.30 160 6.30 160 3.86 98 3.86 98 a
24.37 619 24.37 619 18.62 473 16.42 417 12.48 317 b
lb kg lb kg lb kg lb kg lb kg Weight IP21
(UL Type 1)
48.5 22.0 41.9 19.0 26.0 11.8 14.6 6.6 10.1 4.6
lb kg lb kg lb kg lb kg lb kg Weight IP55
(UL Type 12)
50.7 23.0 44.1 20.0 28.7 13.0 15.0 6.8 10.6 4.8
86 Mechanical installation
4